Size | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
Thickness | SCH: 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS, Custom Thickness. |
Dimension | B16.9, BS 4504, EN-1092, |
Type of Pipe Fittings | Elbow, Tee, Cap, Concentric and Eccentric Reducers |
Specialize | Long Bend with Radius – R = 1D, 1.5D, 2D, 3D, 5D, 6D, 8D, 10D or custom Pigabble Bend & As per your drawing |
Value Added Service | Polish (Electro & Commercial) Heat Treatment Annealed & Pickled, Sand Blasting Machining Etc. |
Grades | |
ASTM A234 WPB Carbon Steel |
ASTM A234 WPB Carbon Steel Elbow Pipe Fittings
ASTM A234 WPB Carbon Steel Tee Pipe Fittings
ASTM A234 WPB Carbon Steel Concentric and Eccentric Reducers Pipe Fittings
ASTM A234 WPB Carbon Steel Cap Pipe Fittings
Nominal Pipe Size | All Fittings | All Fittings | All Fittings | ASME B16.9 Elbows and Tees | ASME B16.9 180 Deg Return Bends | ASME B16.9 180 Deg Return Bends | ASME B16.9 180 Deg Return Bends | ASME B16.9 Reducers | ASME B16.9 Caps |
---|---|---|---|---|---|---|---|---|---|
NPS | O.D. at Bevel (1), (2) | I.D. at End (1), (3), (4) |
Wall Thickness (3) | Centre-to-End Dimension A,B,C,M | Centre-to-Centre O | Back-to-Face K | Alignment of Ends U | Overall Length H | Overall Length E |
½ to 2½ | 0.06 -0.03 |
0.03 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
3 to 3 ½ | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
4 | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
5 to 8 | 0.09 -0.06 |
0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.25 |
10 to 18 | 0.16 -0.12 |
0.12 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
20 to 24 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
26 to 30 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.12 | … | … | … | 0.19 | 0.38 |
32 to 48 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.19 | … | … | … | 0.19 | 0.38 |
ASTM A234 WPB Carbon Steel Pipe Fittings ASME SA234 Tolerance (Elbow, Cap, Tee, Reducer) | 90 Deg. & 45 Deg. Elbow and Tee |
Pipe Reducer & Lap Joint Stub End |
Pipe Cap | |||
Pipe Fitting Dimension (NPS) | Outside Diameter at Bevel |
Inside Diameter at End |
wall thickness T | Center-to-End Dimension A ,C ,B |
Over-all Length H |
Over-all Length F |
1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal thickness |
+/- 0.06 | +/- 0.06 | +/- 0.12 | |
-0.03 | ||||||
3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.25 | |
10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.12 | ||||||
20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.19 | ||||||
26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | +/- 0.19 | +/- 0.38 | |
-0.19 | ||||||
32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | +/- 0.19 | +/- 0.38 | |
-0.19 |
Product supplied | City |
---|---|
ASTM A234 WPB Carbon Steel Elbow Pipe Fittings for Oil Industry | Mumbai, Maharashtra |
ASTM A234 WPB Carbon Steel Tee Pipe Fittings Gas Industry supply | Kochi, Kerala |
ASTM A234 WPB Carbon Steel Concentric and Eccentric Reducers Pipe Fittings supply for Chemicals Industry | Bangalore, Karnataka |
ASTM A234 WPB Carbon Steel Cap Pipe Fittings for the Marine Industry | Chennai, Tamil Nadu |